Product Description
Product Introduction
Highly Brand BMVF37 Ridgid Permanent Magnet Industrial Screw Air Compressor
Oil injected screw air compressor has become the mainstream of air compressor development in the world. It has extremely superior and reliable performance. It has small vibration, low noise, high efficiency and few vulnerable parts. It has incomparable performance advantages of piston compressor (under the same exhaust pressure). The precise coordination between the male and female rotors and between the rotor and the main engine shell reduces the back- flow leakage and improves the efficiency; Only the rotors are meshed with each other, and reciprocating motion without cylinder, which reduces the source of vibration and noise; The unique lubrication method brings many advantages:
1. With the pressure difference generated by itself, lubricating oil is continuously injected into the compression chamber and bearing to simplify the complex mechanical structure.
2. The injected lubricating oil can form oil film between the rotors, and the primary can take secondary rotor to rotate, Without the help of high precision synchronous gear.
3. The injected lubricating oil can increase the air tightness.
4. The lubricating oil absorbs a lot of compression heat, so even if the compression ratio reaches 16, The head can still be controlled below the carbon deposition and degradation temperature of general lubricating oil, There is no friction between the rotor and the outside of the machine due to different expansion coefficient.
5. Lubricating oil reduces the noise caused by high frequency compression.
6. A small amount of oil into the compressed air, pneumatic tools have a certain lubrication.
Product Parameters
|
Screw group |
5: 6 Gear rotor |
|
|
Compression method |
Continuous, CHINAMFG |
|
|
Compressed air outlet pressure |
0.65-1.0MPa |
|
|
Compressed air outlet temperature |
Air-cooled |
|
|
Compressed air outlet temperature |
10ºC~15ºC higher than the ambient temperature |
|
|
Volume of Lubricating Oil |
About 16.5liters |
|
|
Motor speed |
N=3600r/min |
|
|
Rated power |
37kw |
|
|
Air capacity |
V=5.05-6.35m3/min |
|
|
Weight |
500kg |
|
|
Upper air temperature |
45ºC |
|
|
Lower limit of air temperature |
0ºC |
|
|
Fuel consumption |
Exhaust oil content is less than 3PPM |
|
|
Noise level |
76dB(A) |
|
|
Dimensions (length×width×height) (mm) |
1340x850x1330 |
|
Detailed Photos
Wider range of speed regulation, higher accuracy of regulation, wider range of air supply pressure and higher energy efficiency.
The patented design of weak magnetic control, pressure control and simple and stable permanent magnet motor open-loop control can adapt to a variety of adverse working conditions and make the system more stable.
The patented design of weak magnetic control, pressure control and simple and stable permanent magnet motor open-loop control can adapt to a variety of adverse working conditions and make the system more stable.
Motor and screw host coaxial, higher efficiency. The BMVF series is the CHINAMFG industry to achieve the screw host, synchronous motor, permanent magnet control electrical control synchronous design, and to achieve the advantages of cooperation.
Specification
|
Model |
Working Pressure |
Capacity |
Motor Power |
Connector |
Weight |
Noise |
Dimension |
|
Bar |
m³/min |
kw |
kg |
dB(A) |
mm |
||
|
BMVF7.5G |
0.65-1.0 |
1.0-1.25 |
7.5 |
G3/4 |
200 |
72 |
800*510*800 |
| BMVF11G |
0.65-1.0 |
1.5-1.85 |
11 |
G1
|
260 |
73 |
1000*670*1090 |
| BMVF15G | 0.65-1.0 |
2.05-2.35 |
15 |
280 |
73 |
1000*670*1090 |
|
|
BMVF22G |
0.65-1.0 |
2.95-3.95 |
22 |
390 |
74 |
1200*800*1120 |
|
| BMVF37G | 0.65-1.0 |
5.05-6.35 |
37 |
600 |
76 |
1340*850*1300 |
|
|
BMVF45G |
0.65-1.0 |
6.45-8.2 |
45 |
800 |
78 |
1480*1030*1365 |
|
| BMVF55G | 0.65-1.0 |
8.2-9.85 |
55 |
810 |
80 |
||
| BMVF75 | 0.65-1.0 |
10.5-13.1 |
75 |
G2 |
1280 |
81 |
1800*1190*1710 |
| BMVF90 | 0.65-1.0 |
12.5-15.5 |
90 |
1300 |
81 |
||
| BMVF110 | 0.65-0.8 |
22 |
110 |
DN65 |
1850 |
82 |
2700*1230*1730 |
| BMVF132 | 0.65-0.8 |
24 |
132 |
2270 |
82 |
Why Choose Us
CHINAMFG group is a state-level large scale enterprise headquartered in HangZhou, ZHangZhoug province, China. Over the last 60 years CHINAMFG Group has grown to become a significant diversified engineering company developing high value machinery for industry worldwide. CHINAMFG group is the largest rock drill manufacturer in the world, and the largest air compressor manufacturer in China. Exports are shipped to over 25 countries .Today we produce over 30 000 rotary screw and 250 000 reciprocating compressors annually.By the year of 2014 our sales amount was close to RMB 2 billion. CHINAMFG group also has the high-quality customer service system.
Our company is the authorized agent of CHINAMFG Group, specializing in air compressor, energy-saving transformation service and mining engineering construction machinery. We provide comprehensive technical support and after-sales service to customers.
CHINAMFG is headquartered in HangZhou in ZHangZhoug, China. It has subsidiaries in ZheJiang , Chgonqing, ZheJiang , ZheJiang , Hong Kong, Seattle, San Diego, Orlando, Melbourne, Singapore, Jakarta, Leobersdorf, Budapest and Belgrade, as well as offices in Russia, Colombia, Brazil, Korea, Malaysia and Thailand.
Advanced Equipment–Advanced equipment guarantees product quality. Over the years, we have received unanimous praise from overseas users for our integrity and high-quality product quality.
Packaging
The air compressor is guaranteed for 1 year. In addition to wearing parts and consumables, if the spare parts within the warranty period are broken, the company provides free spare parts replacement, but the buyer needs to pay the freight. Please ask customer service for specific warranty rules.
FAQ
Contacts
ZHangZhoug Stars Energy Saving Technology Co., Ltd.
If you want to know more information, please contact us!
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | One Year Warranty |
|---|---|
| Warranty: | One Year |
| Lubrication Style: | Lubricated |
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Cylinder Position: | Horizontal |
| Samples: |
US$ 2340/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
.webp)
Can air compressors be used for painting and sandblasting?
Yes, air compressors can be used for both painting and sandblasting applications. Here’s a closer look at how air compressors are utilized for painting and sandblasting:
Painting:
Air compressors are commonly used in painting processes, especially in automotive, industrial, and construction applications. Here’s how they are involved:
- Spray Guns: Air compressors power spray guns used for applying paint coatings. The compressed air atomizes the paint, creating a fine mist that can be evenly sprayed onto surfaces. The pressure and volume of the compressed air impact the spray pattern, coverage, and overall finish quality.
- Paint Mixers and Agitators: Compressed air is often used to power mixers and agitators that ensure proper blending of paint components. These devices use the compressed air to stir or circulate the paint, preventing settling and maintaining a consistent mixture.
- Airbrushing: Air compressors are essential for airbrushing techniques, which require precise control over airflow and pressure. Airbrushes are commonly used in artistic applications, such as illustrations, murals, and fine detailing work.
Sandblasting:
Air compressors play a crucial role in sandblasting operations, which involve propelling abrasive materials at high velocity to clean, etch, or prepare surfaces. Here’s how air compressors are used in sandblasting:
- Blasting Cabinets: Air compressors power blasting cabinets or booths, which are enclosed spaces where the sandblasting process takes place. The compressed air propels the abrasive media, such as sand or grit, through a nozzle or gun, creating a forceful stream that impacts the surface being treated.
- Abrasive Blasting Pots: Air compressors supply air to abrasive blasting pots or tanks that store and pressurize the abrasive media. The compressed air from the compressor enters the pot, pressurizing it and allowing for a controlled release of the abrasive material during the sandblasting process.
- Air Dryers and Filters: In sandblasting applications, it is crucial to have clean, dry air to prevent moisture and contaminants from affecting the abrasive blasting process and the quality of the surface being treated. Air compressors may be equipped with air dryers and filters to remove moisture, oil, and impurities from the compressed air.
When using air compressors for painting or sandblasting, it is important to consider factors such as the compressor’s pressure and volume output, the specific requirements of the application, and the type of tools or equipment being used. Consult the manufacturer’s guidelines and recommendations to ensure the air compressor is suitable for the intended painting or sandblasting tasks.
Proper safety measures, such as wearing protective gear and following established protocols, should always be followed when working with air compressors for painting and sandblasting applications.
.webp)
What is the energy efficiency of modern air compressors?
The energy efficiency of modern air compressors has significantly improved due to advancements in technology and design. Here’s an in-depth look at the energy efficiency features and factors that contribute to the efficiency of modern air compressors:
Variable Speed Drive (VSD) Technology:
Many modern air compressors utilize Variable Speed Drive (VSD) technology, also known as Variable Frequency Drive (VFD). This technology allows the compressor motor to adjust its speed according to the compressed air demand. By matching the motor speed to the required airflow, VSD compressors can avoid excessive energy consumption during periods of low demand, resulting in significant energy savings compared to fixed-speed compressors.
Air Leakage Reduction:
Air leakage is a common issue in compressed air systems and can lead to substantial energy waste. Modern air compressors often feature improved sealing and advanced control systems to minimize air leaks. By reducing air leakage, the compressor can maintain optimal pressure levels more efficiently, resulting in energy savings.
Efficient Motor Design:
The motor of an air compressor plays a crucial role in its energy efficiency. Modern compressors incorporate high-efficiency electric motors that meet or exceed established energy efficiency standards. These motors are designed to minimize energy losses and operate more efficiently, reducing overall power consumption.
Optimized Control Systems:
Advanced control systems are integrated into modern air compressors to optimize their performance and energy consumption. These control systems monitor various parameters, such as air pressure, temperature, and airflow, and adjust compressor operation accordingly. By precisely controlling the compressor’s output to match the demand, these systems ensure efficient and energy-saving operation.
Air Storage and Distribution:
Efficient air storage and distribution systems are essential for minimizing energy losses in compressed air systems. Modern air compressors often include properly sized and insulated air storage tanks and well-designed piping systems that reduce pressure drops and minimize heat transfer. These measures help to maintain a consistent and efficient supply of compressed air throughout the system, reducing energy waste.
Energy Management and Monitoring:
Some modern air compressors feature energy management and monitoring systems that provide real-time data on energy consumption and performance. These systems allow operators to identify energy inefficiencies, optimize compressor settings, and implement energy-saving practices.
It’s important to note that the energy efficiency of an air compressor also depends on factors such as the specific model, size, and application. Manufacturers often provide energy efficiency ratings or specifications for their compressors, which can help in comparing different models and selecting the most efficient option for a particular application.
Overall, modern air compressors incorporate various energy-saving technologies and design elements to enhance their efficiency. Investing in an energy-efficient air compressor not only reduces operational costs but also contributes to sustainability efforts by minimizing energy consumption and reducing carbon emissions.
.webp)
How do oil-lubricated and oil-free air compressors differ?
Oil-lubricated and oil-free air compressors differ in terms of their lubrication systems and the presence of oil in their operation. Here are the key differences:
Oil-Lubricated Air Compressors:
1. Lubrication: Oil-lubricated air compressors use oil for lubricating the moving parts, such as pistons, cylinders, and bearings. The oil forms a protective film that reduces friction and wear, enhancing the compressor’s efficiency and lifespan.
2. Performance: Oil-lubricated compressors are known for their smooth and quiet operation. The oil lubrication helps reduce noise levels and vibration, resulting in a more comfortable working environment.
3. Maintenance: These compressors require regular oil changes and maintenance to ensure the proper functioning of the lubrication system. The oil filter may need replacement, and the oil level should be regularly checked and topped up.
4. Applications: Oil-lubricated compressors are commonly used in applications that demand high air quality and continuous operation, such as industrial settings, workshops, and manufacturing facilities.
Oil-Free Air Compressors:
1. Lubrication: Oil-free air compressors do not use oil for lubrication. Instead, they utilize alternative materials, such as specialized coatings, self-lubricating materials, or water-based lubricants, to reduce friction and wear.
2. Performance: Oil-free compressors generally have a higher airflow capacity, making them suitable for applications where a large volume of compressed air is required. However, they may produce slightly more noise and vibration compared to oil-lubricated compressors.
3. Maintenance: Oil-free compressors typically require less maintenance compared to oil-lubricated ones. They do not need regular oil changes or oil filter replacements. However, it is still important to perform routine maintenance tasks such as air filter cleaning or replacement.
4. Applications: Oil-free compressors are commonly used in applications where air quality is crucial, such as medical and dental facilities, laboratories, electronics manufacturing, and painting applications. They are also favored for portable and consumer-grade compressors.
When selecting between oil-lubricated and oil-free air compressors, consider the specific requirements of your application, including air quality, noise levels, maintenance needs, and expected usage. It’s important to follow the manufacturer’s recommendations for maintenance and lubrication to ensure the optimal performance and longevity of the air compressor.
editor by CX 2024-04-11